+34 644 098 320
+34 91 417 04 02
WhatsApp +34 644 098 320
Call + 34 972 25 62 12
⌛ Urgent 24-48 Hours Delivery Available 📦
Table of Contents
1 – Vip Pro MegaMini earpiece
2 – 1 x LIR640 Rechargeable Battery (eabove or below the pad)
3 – Bluetooth microphone
4 – Charging Case
5 – USB-MicroUSB Charging Cable
6 – MicroUSB-TypeC adapter
7 – EU 1A charger
8 – Storage Box
Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.
If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.
The bluetooth microphone and the earpiece battery have low or no factory charge and needs to be charged before first use.
FOR charge the bluetooth microphone plug it in via the included USB-microUSB charging cable and with the included 1A charging plug (or to a computer's USB). A blue LED will flash while charging and will turn off when the charge is 100%. When you unplug it, it will automatically turn on. and we can turn it off by holding the button for 5 seconds as we will see in the next step.
FOR charge the earpiece battery (stack on top of or under the box pad) open the compartment from the charging case by sliding the piece indicated in the image with a red arrow, Insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole) y close the compartment.
turn on the mic holding the power button for 5 seconds until the Blue LED flashes 3 times.
Then turn on bluetooth on your mobile y connect to device «bt01». If the device “bt01” does not appear, press the power button again, as it may have been on and we turned it off. It flashes when we turn it on.
FOR turn off the mic Press and hold the button again for 5 seconds. We can check that it has been turned off Checking on our mobile that it is not connected to the bluetooth «bt01» (with the earpiece battery removed).
Unscrew the black cover of the handset and insert the battery (stack on top of or under the box pad) with the larger, positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Then screw the cap back on, making sure it is screwed in tightly.
La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.
The model of the rechargeable battery required by the earpiece is LIR640 and you can purchase more on our website click here.
Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.
place the mobile at a distance of less than 7-10 meters of the earphone and microphone.
Play a song on your phone and turn up the volume to listen through the earpiece.
Calls or receive a call and will be answered automatically listening through the earpiece and transmitting through the microphone.
El microphone multifunction button allows the following functions to be performed:
It is possible to use only the earpiece without the Bluetooth microphone and vice versa.To do this, just turn on the earpiece or microphone.
If the sound is too loud or you can't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.
El hidden microphone should be placed at more than 10 cm from the mouth, and less than 25 cm to improve uptake.
The volume of the earpiece It is controlled by pressing directly From the phone
Do not set the volume too high on the headset or it will be heard outside your ear.
El microphone battery percentage It can be consulted when we connect it to the mobile via bluetooth. Depending on the mobile will appear in the upper right corner of the screen or in Settings>Bluetooth.
The battery life of the bluetooth microphone is approximately 12 hours and the earpiece 2.5 hours.
Remove the spy earpiece by pulling the transparent thread with your fingers. If you can't do this, you can try Pull the clear thread with tweezers. Then, remember to disconnect the battery when you finish using the spy headset to prevent it from discharging. As long as the battery is inside, it will continue to consume.
Finally, for turn off the mic hold the button for 5 seconds. We can check that it has been turned off Checking on our mobile that it is not connected to the bluetooth «bt01» (with the earpiece battery removed).
Can check the VideoTutorial along with instructions to better understand how the earpiece works:
If you have questions, don't hesitate to contact us! 😉
the penguins can be complex products when putting them into operation. Check below the common problems with the Vip Pro MegaMini Bluetooth earpiece.
To put the bluetooth microphone in pairing mode must Press the button and DO NOT RELEASE it until the lights flash blue. Connect your mobile Turn on Bluetooth and search for the device “bt01”. If it doesn't turn on, you should charge it..
The earpiece, if it is to be used with the microphone, must turn on after turning on the microphone.
Si We just want to use the earpiece We can insert the battery and connect to the Bluetooth device “bt01”.
If the device does not appear, check:
Place the mobile phone within 7-10 meters of the headset and microphone and place the spy earpiece in your ear.
Then play a song and turn the volume up to maximum. also can try a call by turning up the volume.
If you still can't get it to work, contact us via chat.
The volume is controlled directly from the mobile, raising and lowering the sound with the volume key.
Also, always remember turn on the microphone before the earpiece.
Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.
Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Vip Pro MegaMini Bluetooth
Model Number: VP-23
Product identifier: 706212918408
Product battery: Integrated Lithium-Ion type with 10 mAh capacity
Battery Included: 1 x LIR640 Battery
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.
Anywhere in the world
Up to 14 calendar days
Quick and Efficient Management
PayPal / MasterCard / Visa
