Instructions for 8GB Spy Camera Bracelet

Table of Contents

1 Instructions for 8GB Spy Camera Bracelet

Spy Camera Bracelet 8GB

The 8GB Spy Camera Bracelet is a compact and discreet device that allows you to capture high-quality images and videos at Full HD 1080P In a simple way. Equipped with integrated microphone, and a camera angle of 65º. Includes recording with up to 30 fps and function of audio recording. The autonomy is up to 120 minutes and includes built-in memory 8GB.

Technical characteristics

Resolution of Full HD with great quality reproduction of colors and sharpness. You will be able to observe every movement captured by the camera.

Capture images of up to 1920 x 1080, also includes integrated microphone y 65º angle lens.

The function of audio recording allows you with the integrated microphone store recordings in format WAV.

The files in AVI or JPG format are stored in a 8GB built-in memory. Includes USB cord for file transfer and upload.

The bracelet includes a built-in rechargeable battery 300mAh. This battery can be 100% charged in 1-2 hours and offers up to 120 minutes of use.

Content

Spy Camera Bracelet 8GB

USB Charging and Transfer Cable

Manual

Instructions

Step 1 - Load

It is necessary to charge the product before its first use. To charge the battery open the protective cover of the USB port and Connect the included USB charging cable. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (Maximum 5V 1.0A, if more amperage is used, the useful life of the battery integrated in the bracelet will be reduced).

The device will start charging, the screen will turn on and the battery on the screen will start flashing. The battery will be fully charged when it stops flashing. It's very important use the included charging cable to ensure correct charging.

Step 2 - Power On/Off and Time Setting

The bracelet has of the states:

Bracelet in Date and Time mode - Cannot use recording or photography functions, only the date and time will appear along with the current battery. After 10 seconds the screen will turn off and we can turn it on by pressing the ON/OFF button once.
Bracelet in Recording/Photography mode - Only the time will appear, but not the date. The bracelet is in "standby" state and it is possible to start a recording or take a photograph. After 15 minutes in this state, if no action has been taken, it will automatically switch to Date and Time mode. If it is not possible to switch to this mode, the battery of the bracelet is very low.

To switch between these two states, Press and hold the ON/OFF button for 3 seconds until the dateless display turns on. For set the time connect the bracelet to the computer and run the file included on the card with the name “SETTIME.exe” or SETTING.exe”. Then click on “Exit” and the computer time will have been synchronized with the bracelet.

Another method to synchronize time on the bracelet is to connect the bracelet to the computer and create a file with a name TIME.txt. In this file we must indicate the current date and time. For example, if we want to indicate the date 10/06/2023 and time 12:00, we will modify the first line of text to: 2023-06-10, 12:00:00. Remember save changes to file.

FOR To turn off the bracelet, press and hold the ON/OFF button for 3 seconds entering date/time mode. The bracelet will automatically turn off after 10 seconds in this state.

Step 3 - Video, Photography and Audio Recording

While in Recording/Photography mode, use the right side buttons of the bracelet for:

Video: press the top button once until the circle logo appears. Press again to stop recording and save.
Audio: hold down the top button until a triangle logo appears. Press again to stop recording and save.
Photography: press the bottom button once. The camera icon will appear and disappear to indicate that the image has been saved.

Step 4 - Reset

If the bracelet is blocked and does not react, we can reset it pressing the reset button on the right side with a paper clip.

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

1 - Does not turn on

2 - Does not store

If the bracelet is blocked and does not react, we can reset it pressing the reset button on the right side with a paper clip.

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

Product specifications:

Model Name: 8GB Spy Camera Bracelet

Model Number:CE-19

Product identifier: 706212918430

Product battery: Integrated Lithium-Ion type with 500 mAh capacity

Operating temperature: 0 to 40ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on

Instructions for 8GB Spy Camera Bracelet

Spy Camera Bracelet 8GB

Technical characteristics

Content

Instructions

Step 1 - Load

Step 2 - Power On/Off and Time Setting

Step 3 - Video, Photography and Audio Recording

Step 4 - Reset

Frequent Problems

1 - Does not turn on

2 - Does not store

Security and Compliance