Vip Pro GSM Card Instructions

Table of Contents

1 Vip Pro GSM Card Instructions

What is a Vip Pro Pinganillo?

A vip pro earpiece is a auricular small size wireless which is inserted into the ear, remaining hidden. This type of hidden headphones are usually used for cheating in exams, use in presentations, espionage...

How does the Vip Pro Pinganillo Work?

this kit works through a GSM inductor element hidden under clothing that transmits the sound to the earpiece and includes an integrated microphone for communications. It is a very popular kit today.

the penguin works using technology electromagnetic induction. The inductor element generates an inductive wave that will cause a vibration in the earpieces, resulting in sound. Thanks to induction technology we can use Hidden earpieces at a good price with a small size and resistant to inhibitors.

Is the Vip Pro Pinganillo Safe?

Yes, the Pinganillo Vip Pro has the size suitable for insertion into the ear and includes a transparent thread for its extraction with the fingers or with a tweezers in case it has been very inserted. This penguin not waterproof and should be cleaned with the battery removed using a fine needle for the holes and a dry cloth or a damp cloth with alcohol so as not to damage it.

Technical characteristics

The GSM Vip Pro Inductor Card is very easy to hide under clothing thanks to its small size and the fact that it has no cables.

The GSM Card emits inductive waves his amplified by the earpiece generating sound. The device requires a battery.

GSM card requires a NanoSIM card for phone calls.

The GSM Card integrates a rechargeable battery inside. This battery can be charged at 100% in approximately 1 hour.

The Vip Pro earpiece requires a battery for its funtionability. Two are included with the kit and you can purchase more on our website or at watch stores.

The autonomy of the handset and the GSM card is approximately 3-4 hours depending on volume. The battery must be disconnected from the earpiece when not in use to prevent discharge.

Kit Contents

1 – GSM card

2 – Vip Pro SuperMini / UltraMini earpiece

3 – 2 Batteries 337/SR416SW

4 – USB charging cable

Instructions

Step 0 - Original Product PingaOculto

Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.

If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.

Step 1 - Stack Introduction

Unscrew the black cover of the handset and Insert the battery with the positive side facing up (where are the letters of the brand and the model of the battery is the positive pole).

Then screw the cap back on, making sure it is screwed in tightly.

La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.

The battery model required by the handset is 337-SR416SW.

Step 2 - Operation Check

This sound similar to an untuned radio is normal in all Vip Pro Earpieces. It is due to the constant amplification of the inductive waves emitted by the inductive element. This sound decreases when something is played and when the battery power decreases. Thanks to this technology, we have great autonomy and very small headphones.

Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.

Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.

This sound indicates that it is turned on and works properly.

If the sound is very loud and can be heard without having the earpiece in your ear, unscrew the cover and check that the battery is oriented with the positive + pole facing up and carefully screw the cover back on. If the cover or battery is not aligned it will make this noise. If you are still experiencing this problem and the sound is similar to that of a bee check step 4 of common problems.

If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.

Step 3 - Introducing the Earpiece

Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.

Step 4 - Remove SIM PIN Code

To use the SIM card with the Kit it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings.

If you don't find the option, search on google: “remove sim card pin code + mobile model/brand”.

Step 5 - Introduction SIM Card

Introducing a Nano SIM card according orientation that appears in the image. The Nano SIM will be correctly inserted when you hear a click.

FOR extract it push Nano SIM card in until you hear a click.

Step 6 - Power on

The product is shipped with little or no cargo, It is recommended to charge it before its first use. (See Step 9)

Turn on the Vip Pro GSM Card moving the switch to the RET position which is closer to the charging port and the card screen will light up with the message “Welcome” (if it doesn't turn on, charge it with the included cable and charger for at least 1 hour).

To turn off the Vip Pro GSM Card, move the switch back to the OFF position.

Step 7 - Function Test

Place the kit on the body as shown in the image, remembering that the inductor card must always be between the neck and chest so that the spy earpiece receives the sound.

Call from a mobile phone to the SIM card and will be answered automatically.

For added security, It is recommended to fix the GSM card with cloth or plastic tape to the skin so that it does not move during use. You can even sew it to sweatshirts or jackets.

Remember that It is essential that the GSM induction card is between your neck and your chest, under the clothes, so that the spy headset receives the sound by induction.

If the sound is too loud or you can't hear anything, see the common problems at the bottom of this page. Also remember that you can contact us via chat for help.

Step 8 - Microphone and Volume

El Integrated microphone is located inside the GSM card.

The volume is controlled based on the distance between the GSM card and the spy headset: the closer, the more volume; the further away, the less sound.

Do not place the GSM card too close to the earphone or it will be heard outside the ear.

Step 9 - Earpiece Removal, Battery and Shutdown

Remember to turn off the inductive GSM card while not in use and while charging

The battery life of the Inductor Vip Pro card is approximately 3 hours.

To charge it, connect it to the electrical network with the charging cable included in the kit and in a charger up to 5V and 1A. A battery icon will light up when plugged in. Estimated charging time is 1 hour.

Remove the spy earpiece by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.

Lastly, Remember to remove the battery when you finish using the spy headset to prevent it from downloading. As long as the battery is inside, it will continue to consume.

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Frequent Problems

the penguins can be complex products when putting them into operation. Check the Common problems with the Vip Pro GSM Card:

1 - Does not establish the call

It can be due to several reasons. Perform the following checks:

Check if the GSM card screen shows any error messages such as showing “Insert SIM” or “Emergency” and the operator does not appear, which means that it is not recognizing the SIM card or that there is no coverage.
Check that the Nano SIM card does not have a PIN. You can check it by entering it in your mobile and restarting the mobile. If it asks for the SIM pin at power-up, you should remove it. To use the SIM card with the Kit it is need to temporarily remove the SIM pin code. You can find the setting on your mobile in security, privacy or similar settings. If you don't find the option, search on Google: “remove SIM card pin code + mobile model/brand”.

Verify that it has battery and has been charged off.

Verify that you have inserted the Nano SIM card correctly and heard it click when entering it.
Verify that the Nano SIM card can make or receive calls.
Verify that the GSM Card compatible GSM bands which are: 850 / 900 / 1800 / 1900 are available in your country in: https://www.worldtimezone.com/gsm.html
Test in the open to rule out a coverage problem. Besides, try another Nano SIM card from another operator. For example, in Spain, the most recommended operators are Movistar or Vodafone and the least recommended is Orange and similar.

The GSM Card receives less signal than a mobile phone. It is important to try an operator with good coverage.

2 - Doesn't work

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the card near your neck/chest and the spy earpiece in your ear. Next, make the call to the SIM card. If it does not work, try restarting the card

Si still not hearing the call, check again placing the headset close to the card and try calling again. Also try another battery in the headset.

If you still can't get it to work, contact us via chat.

3 - I can't hear anything or very low

Clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear.
Check that the battery has charge. if he has left her inserted into the earpiece for a long period of time, it will be discharged and you must use another new battery. The battery discharges even if the handset is not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where are the letters of the brand and the model of the battery is the positive pole).
Screw the cap back on checking let it remain correctly screwed.

If you hear a sound similar to that of a tuned radio when you put the spy earphone on your ear with the battery inserted, the spy headset is working and the problem is another.

Place the card near your neck/chest and the spy earpiece in your ear and Make sure it is properly connected to your mobile phone (check the first problem in common problems), then, make the call to the SIM card. If it does not work, try restarting the card.

Si still not hearing the call, check again placing the headset close to the card and try calling again. Also try another battery in the headset.

If you still can't get it to work, contact us via chat.

4 - A very loud sound sounds, like a bee

Untuned radio-like sound is normal in all Vip Pro spy headphones. It is due to the constant amplification of the inductive waves emitted by the inductive element.
If the sound is very loud, and You can hear it even when it's not in your ear, follow the steps below:

If the sound is very loud and can be heard even with the earphone out of the ear, unscrew the cap and Check that the battery is oriented with the positive + pole facing up and that the cap is screwed on correctly and aligned. If the problem persists, remove the cover again and Gently pull the spring inside the earphone with your fingernail or tweezers. Thus, will be deformed and contact will be made correctly. Can be necesario perform this adjustment occasionally or on first use.

5 - The microphone does not work

El Integrated microphone is located inside the GSM card. Is It is important not to cover the GSM card and have it close to your mouth.

Do not place the GSM card too close to the earphone or it will be heard outside the ear.

6 - I can't extract the earpiece

Remove the earpiece pulling the transparent thread with your fingers. If it is not possible, you can try pull the transparent thread with some tweezers. Is It is advisable that another person remove it by us, since you will be able to see the thread better to pull it with the tweezers.

Lastly, remember to disconnect the battery when you are done before using the device to prevent it from discharging.

7 - The Earpiece has stopped working

Check that the battery is charged. If it has been left on the spy headset Even if you are not using it, it will be downloaded and you will need to use a new battery.
Check that earwax does not clog the speaker of the spy earpiece. If it is, clean it carefully with a needle or pin. Can be necessary to perform this step every few uses.
Si hear a sound similar to that of an untuned radio When you put the spy earphone in your ear with the battery inserted, the spy earphone is working and the problem is something else. Follow the steps for common problems (3 – I can't hear anything or very low).

Can check the VideoTutorial along with instructions to better understand how the earpiece works:

If you have questions, don't hesitate to contact us! 😉

Security and Compliance

Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:

⚠ FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER DAMAGE OR INJURY.

⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.

Product specifications:

Model Name: Vip Pro GSM Card

Model Number:VP-11/VP-12

Product ID: 706212918415 / 706212918392

Product battery: Integrated Lithium-Ion type with 300 mAh capacity

Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW

Operating temperature: 0 to 35ºC

Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.

Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.

For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.

Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.

How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.

Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.

Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.

Find Out More

Do you want to contact us?

follow us on