Full HD Car Spy Camera Instructions
Table of Contents
- 1 Full HD Car Spy Camera Instructions
Full HD Car Spy Camera
Technical characteristics
- Full HD recording
- Rotating Lens with Night Vision
- microSD storage
- File Transmission via WIfi
- Integrated Battery
Contents
Full HD Car Spy Camera
Cleaning Cloth
USB Charging Cable
Manual
Instructions
Step 1 - Load
The battery is shipped with a low charge. It must of charge with a USB charger.
The camera emits a Red light while charging that turns off when charging is 100%:
El charging time is about 3-4 hours when connected to a 1 amp charger at 5 Volts (
Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
It is possible to record with the camera while charging, although doing it continuously will reduce the useful life of the battery.
Step 2 - MicroSD
Introduce before ignition the microSD into the slot until you hear a click. It is recommended to format the card to FAT 32 format and use a card with a Class 10 transfer speed.
The minimum size allowed is 4 GB and the maximum 128 GB.
It is possible to perform the formatting from camera. To do this, insert the microSD before turning on, turn on the camera by holding down the button with the camera icon until the blue LED turns on and press the button again 5 times in a row. The green LED will flash quickly until formatting is completed. ⚠️ Please note that this step will delete all files.
Step 3 - Power On/Off
Turn on the camera holding down the button with the camera icon for 3 seconds. A blue LED will light up. If the blue LED flashes, the microSD has not been correctly recognized. If he blue LED is fixed, the microSD reading is correct and the camera is ready to start recording.
For turn it off, repeat the procedure until the blue LED turns off. If the camera is on for more than 5 minutes without Wi-Fi enabled, recording or video will be turned off automatically.
Step 4 - Recording Video, Audio and Night Vision
Press the button with the camera icon once to start the Video recording. The blue LED will start flashing. For stop recording, press the same button again. The blue LED will stop flashing. If recording is not stopped, the camera will continue recording and will divide the recording into 5-minute videos for safety reasons.
Press once on the button with the microphone icon to make a recording. The green LED will start flashing. For stop recording, press the same button again. The green LED will stop flashing. If the recording is not stopped, the camera will continue recording and will divide the recording into 1-hour audios for safety.
For activate infrared Night Vision The switch located under the button with the microphone icon must be activated. When placed in position on the green led flashes once. When it is turned off, no LED lights up.
Step 5 - Wifi connection
Step 5.1 - Application Download
Download the DVRunning2 app on your mobile by pressing the Play Store (Android) or App Store (iPhone) icon depending on the model of your device.
Step 5.2 - Wifi connection
Press the button with the wifi icon while the camera is on to turn on the camera's Wifi mode. When Wi-Fi is activated, a green light will flash. Next, access the mobile's Wi-Fi settings and connect to the wifi network wifi_camera_L01… If a notice appears when connecting indicating that this Wi-Fi network does not have internet and showing the option to maintain the connection or disconnect it, we must maintain the connection.
The green light will remain steady as long as there is a device connected via Wifi.
Step 5.3 - Wifi connection
Open the app and grant all required permissions.
Click on «Click to connect your device«.
Connect to the Wi-Fi network created by the camera: wifi_camera_L01…
The application will recognize the wifi of the camera to which we are connected and we will be able to visualize it.
Step 5.4 - Gallery and Camera Settings
Click on the icons at the bottom to view gallery and settings. For view files recorded by the camera when we were not connected to the wifi network we must Click on the desired file below the main viewing screen, where it indicates «Device files«.
They can also be viewed by inserting the microSD directly into the computer or mobile phone.
In the "Settings" tab we can modify the settings of the camera.
Frequent Problems
1 - Does not turn on
The battery is shipped with a low charge. It must of charge with a USB charger.
The camera emits a Red light while charging that turns off when charging is 100%:
El charging time is about 3-4 hours when connected to a 1 amp charger at 5 Volts (Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
It is possible to record with the camera while charging, although doing it continuously will reduce the useful life of the battery.
2 - Does not store
It is possible to perform the formatting from camera. To do this, insert the microSD before turning on, turn on the camera by holding down the button with the camera icon until the blue LED turns on and press the button again 5 times in a row. The green LED will flash quickly until formatting is completed. ⚠️ Please note that this step will delete all files.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 4 and 128GB and that the transfer speed is minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Full HD Car Spy Camera
Model Number:CE-26
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 1200 mAh capacity
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .