Instructions GPS Locator Dogs
Table of Contents
- 1 Instructions GPS Locator Dogs
GPS Dog Locator
Technical characteristics
- 10 Meter Location Accuracy
- History Tracking
- Real Time Location
- Geographic Fence Alert
- More than 30 Hours of Use
Contents
GPS Dog Locator
Collar for Dogs or other Pets
USB Charging Cable
Manual
Instructions
Step 1 - Opening, Charging and SIM
remove casing inserting the nail into the side of the casing.
It is necessary to charge the GPS locator. He charging time is about 1-2 hours when connected to a 1 amp charger. In case of connecting it to one with a lower amperage, its charging time will increase. You can check the amperage of your charger in the specifications on it (Example: 0.45A). As long as the locator charges, the red light will stay on and it will turn off when fully charged.
The GPS Dog Locator requires a NanoSIM card without PIN code and with internet. You can find the setting on your mobile in security, privacy or similar settings. If you don't find the option, search on Google: “remove SIM card pin code + mobile model/brand”. When the SIM PIN has been removed slide the Nano SIM card tray and lift it up, pose the NanoSIM card to fit according to the drawing and close the tray by sliding it again.
Step 2 - Power On/Off, Status Lights and APN
For turn on the GPS locator after inserting the NanoSIM card Press and hold the ON/OFF button for 3 seconds (located above the QR code). The status lights will turn on and we must wait at least 3 minutes for ignition to complete. For delete the locator Press and hold the ON/OFF button for 9 seconds.
The status lights indicate:
- Blue light - GPS connection | Fast Flashing – Searching GPS Signal | Slow Flashing – Connected to GPS Signal.
- Yellow light - GSM and GPRS connection (mobile data via SIM) | fixed – SIM Card Error | Fast Flashing – Searching for GSM or GPRS Signal | Slow Flashing – GSM/GPRS connected.
- Red light - Battery status | Fast Flashing – Low Battery | Slow Flashing – Battery Greater than 15%.
After switching on and waiting for at least 3 minutes 3 situations may occur:
- Yellow Light Slow Flashing – The GPS Locator is connected to the internet and we can move on to the next step.
- Steady Yellow Light – The SIM card has been inserted incorrectly, the SIM PIN has not been removed or the card does not have an internet rate enabled.
- Yellow Light Fast Flashing – The SIM card reading is correct and it has been connected to the GSM network (telephone line) but it is not possible to connect to the GPRS network (internet). Follow the next step.
For configure the APN If it has not been configured automatically, the following steps must be followed:
- Send an SMS to the SIM number that has been entered into the tracker while it is on with the message: imei#
- After receiving the IMEI in response, send APN parameters from our telephone company that we can search on Google by writing: APN configuration + "Telephone company".
- Send the APN parameters following the scheme: APN#parameter#account#password# (indicating in parameter, account and password the values indicated by our company) or send alone: APN#parameter# if username or password is not necessary. We will receive as a response “Setting Successfully Online Parameter!” confirming the change of APN settings.
Step 4 - Location by Application
Step 4.1 - Application Download
Download the 365GPS app on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device. You can also check the location from 365gps.net, but the operation will be better in the app.
Step 4.2 - Login and Permissions
When starting the 365GPS application it will be necessary scan the QR code of the product by clicking on the icon in the app in the user bar or enter the 15-digit IMEI that appears written below the QR code on the product. La Default password is 123456 or the last 6 numbers of the IMEI.
If the application requests any permissions during its execution, it must be accept all permissions to ensure correct operation.
Step 4.3 - GPS Location
In the lower menu select the first option. By clicking on the refresh button top right corner We can request the GPS locator for the current position and obtain the updated location after 3-8 seconds. exist various technologies to obtain the location:
- GPS – When the GPS locator is at outdoors or in an area with good connection will connect to GPS satellites providing a precise location.
- Wi-Fi – The GPS Locator can connect to the Wi-Fi that we select and get the location using the MAC address.
- LBS – The GPS Locator will provide a estimated location based on the connection to the GSM signal tower.
Location accuracy is essential in the use of the locator. Depending on the technology used, the precision will be:
- GPS - 10 meters outdoors
- Wi-Fi - Between 50 and 500 meters. It is based on the MAC address provided by the Wifi network may be restricted in your country, for example in Germany.
- LBS – Above 100 meters. Because it is based on the connection to the GSM signal tower, it will be more accurate in the city than in the countryside.
Step 4.4 - Functions
In the lower menu select the second option "Function". In this menu we can see all features available of the GPS locator:
- Contacts – Add emergency contacts to call when there is an alert.
- Safety scope – Allows you to define an area on the map. When the GPS leaves said area you will receive an alert.
- Reproduce – Stores GPS locator locations in intervals. Other days can be consulted on the calendar.
- Find device – Makes a sound to locate the GPS. In this model, as it does not incorporate a speaker this feature is not supported.
- Battery saving – Allows you to activate/deactivate the ultra-energy saving mode by turning off the location and the LEDs.
- Assistance – Configuration of connection to Wi-Fi networks scheduled according to the days of the week.
- Alarm – Activate/deactivate up to 3 alarms on the GPS locator. Since it does not have a speaker or vibration, this feature is not supported.
- Do not bother – Setting a schedule in which we will not receive alerts or calls from the GPS locator.
- Information – Shows the activity history of the GPS locator.
Step 4.5 - Settings and Remote Control
In the lower menu select the third option. In this menu we can see all settings available of the GPS locator:
- IMEI code – Allows you to change the location icon on the map in addition to the name and view GPS locator information.
- Update time – Change the location update time between 3 modes based on accuracy and battery consumption.
- modify password – Change the default password of the GPS locator.
- ON OFF – Configuration of notifications, warnings and LEDs, as well as remote restart and shutdown of the GPS locator.
- FAQ – Answers to Frequently Asked Questions
- Factory data reset – resets the GPS tracker to the factory state. Recommended if there is any error in its operation.
Step 5 - SMS Commands
The GPS locator allows your advanced control by sending SMS to the integrated SIM card number:
- DEVICEID# – Device ID.
- SYSRST# – Reset.
- 1122# – Factory reset.
- INFO# – Device information.
Frequent Problems
1 - Does not turn on
Connect the charging cable into the charging port and connect to the power using a charger maximum 5V and 1A.
Wait at least 1-2 hours for it to charge completely and try again remembering Press and hold the ON/OFF button for 3 seconds.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: GPS Dog Locator
Model Number:GPS-04
Product identifier: 706212918430
Operating temperature: 0 to 50ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .