Instructions Camera Button
Camera Button
Technical characteristics
- Video recording
- High Quality Images
- microSD storage
- Integrated Battery
Contents
Camera Button
USB Charging and Transfer Cable
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery Connect the included charging cable to the microUSB port on the side of the product and Connect the included USB charging cable. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (
Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
The device will start charging and the red blue light will start flashing. The battery will be fully charged when the light goes off.
Step 2 - MicroSD
Introduce before ignition the MicroSD into the side slot until you hear a click. It is advisable to format the card to FAT 32 format. The maximum size allowed is 16 GB.
Step 3 - Power On/Off
To turn on the camera, press and hold the lower power button. When the camera is turned on will vibrate and a red light will turn on.
Step 4 - Video, Photography and Audio Recording
After turning on the camera, use the front buttons to:
- Video: hold down the top button. The red LED will light up and the camera will vibrate twice. For stop recording, press the bottom button once. The camera will vibrate and the red LED will turn on. Videos will be automatically saved in 15 minute videos
- Photography: press the top button once. The red LED will turn on, the camera will vibrate and the photo will be saved to the microSD.
Step 5 - Reset
If the camera is blocked and does not react we can reset it pressing both buttons at the same time while it is on.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery Connect the included charging cable to the microUSB port on the side of the product and Connect the included USB charging cable. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
The device will start charging and the red blue light will start flashing. The battery will be fully charged when the light goes off.
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 1 and 16GB.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Camera Button
Model Number:CE-20/21
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 245 mAh capacity
Operating temperature: 0 to 40ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .