Instructions Moldable Wifi Spy Camera
Table of Contents
- 1 Instructions Moldable Wifi Spy Camera
Wifi Castable Spy Camera
Technical characteristics
- Full HD recording
- 360º Wide Angle Lens
- microSD storage
- Remote Transmission via WIfi
- Integrated Battery
Contents
Wifi Castable Spy Camera
Wall Fixing Support
3M adhesive
USB Charging and Transfer Cable
Shutdown Clip
Manual
Instructions
Step 1 - Load
The battery is shipped with a low charge. It must of charge with a USB charger.
The camera emits a green light while charging that turns off when it reaches 100%.
El charging time is about 3 hours when connected to a 2 amp 5 volt charger (
Maximum 5V 2.0A, using more amperage will reduce the life of the camera's built-in battery).
The camera can be charged while on, but it will increase the loading time. It is also possible to use the camera always connected to the charge.
Step 2 - MicroSD
Introduce before ignition MicroSD into the slot located at the bottom of the product until you hear a click. It is recommended to format the card to FAT 32 format and use a card with a Class 10 transfer speed. The minimum size allowed is 2 GB and the maximum 256 GB.
Step 3 - Power On/Off
Turn on the camera pressing the power button. At power-up we can hear a voice indicating in English the power-on steps and status of the product and The LEDs will indicate the status of the camera:
- Red LED – Steady: Waiting for Wi-Fi configuration.
- Blue LED – Steady: Wi-Fi configuration completed.
- Blue LED – Fast Flashing: Disconnected from the configured Wi-Fi network.
- Blue and Red LED – Fixed: Error in configuration, it is necessary to reset the camera.
At turn it off, press with the included clip into the hole indicated by the letters OFF on the bottom of the camera.
Step 4 - Wifi Remote Viewing
Step 4.1 - Application Download
Download V380 Pro App on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device.
Step 4.2 - Permissions and User Registration
When starting the application it is necessary grant all required permissions y create a user or log in to our user account. It is advisable to keep the Wifi and Bluetooth activated during setup
Step 4.3 - Scan QR Code
Turn on the camera and wait at least 15 seconds for the camera to turn on. When the camera's Wifi is activated, a Steady red LED.
Access the application and click on «Add device«. Scan QR code located on the back of the camera.
Then click on «WiFi connected device«.
Step 4.4 - Scan QR Code and Wifi Connection
Select “Hot Spot Connection”, click on the Wi-Fi network to which the camera will be connected and (remembering that only 2.4GHz type networks are allowed) and indicate the password of the Wi-Fi network.
Then click on «Connect AP Point" Y connect to the camera's Wifi network with name MVXXXXXXXX. If a message appears indicating that the Wi-Fi network does not have an internet connection, click on «Maintain connection«. Back to application and the camera will finish setting up.
Lastly, connect to the same Wi-Fi network that the camera and Scan the camera QR code again if requested the app.
When the camera is correctly configured the blue light stays on.
Step 4.5 - Password and Camera Settings
While we view the camera we can adjust various parameters, make recordings, images, etc. We can also change other settings on the main screen of the app by clicking on the 3 dots icon.
Step 5 - Fixation
The camera can look at various positions using the included stand and the 3M adhesive strip. Furthermore, the camera cable is flexible and includes holes in the support for fixing with screws if the installation requires it.
Step 6 - Reset
If the camera is failing or we want to restore factory settings, press the reset button and hold for at least 6 seconds while the camera is on. Then wait for 20 seconds for it to reset.
Frequent Problems
1 - Does not turn on
The battery is shipped with a low charge. It must of charge with a USB charger.
The camera emits a green light while charging that turns off when it reaches 100%.
El charging time is about 3 hours when connected to a 2 amp 5 volt charger (Maximum 5V 2.0A, using more amperage will reduce the life of the camera's built-in battery).
The camera can be charged while on, but it will increase the loading time. It is also possible to use the camera always connected to the charge.
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 32 and 256GB and that the transfer speed is minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model name: Moldable Wifi Spy Camera
Model Number:CE-09
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 3200mAh capacity
Operating temperature: 0 to 50ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Legal notice: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 644 098 320.
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 644 098 320.