Full HD Spy Camera Charger Instructions
Table of Contents
- 1 Full HD Spy Camera Charger Instructions
- 1.1 Full HD Spy Camera Charger
- 1.2 Technical characteristics
- 1.3 Contents
- 1.4 Instructions
- 1.5 Frequent Problems
- 1.6 Security and Compliance
Full HD Spy Camera Charger
Technical characteristics
- Full HD recording
- Wide Lens Angle
- Integrated Storage 8GB + Expandable with microSD
- Remote Transmission via WIfi
- Integrated Battery
Contents
Full HD Spy Camera Charger Without Wifi/Wifi
USB Transfer Cable (not included in version with wifi)
Reset Clip (not included in version with wifi)
Manual
Instructions
Step 1 - Opening
The charger no Wi-Fi hides a compartment for MicroSD slot, Mode Change, USB Connection and Reset.
For open the compartment it is due to insert the nail and leverage.
Step 2 - Load
The battery integrated into the charger It only has the function of saving the recording if you disconnect. To use it, it must be connected to a socket. The charger allows you to charge a mobile phone or other device while it is on and recording. The charger provides a 5V and 1A charge compatible with most devices.
Step 3 - MicroSD
Introduce before ignition MicroSD into the slot until you hear a click. In the charger with Wi-Fi, the microSD slot is located in the charging connectors of the charger.
It is advisable to format the card to FAT 32 format and use a card from a recognized manufacturer. The maximum size allowed is 32 GB.
Step 4 - Power On/Off
The charger turns on automatically when connecting it to a socket. In the model of charger with Wifi the status LED is located on the side of the charger and In the model without Wifi it is located behind the cover.
For turn off the charger, disconnect it from the socket. The recording will be saved automatically.
Step 5 - Video Recording without Wifi
Model charger without Wifi includes two recording modes:
- Continuous Recording (L Mode)
- Motion Detection Recording (M Mode)
Recording mode must be adjusted before connecting the charger to the socket.
At Continuous Recording mode (Mode Change switch in L) when you connect the charger to the socket the LED will light blue and red. They will then turn off and The red LED will flash 3 times indicating the beginning of recording. The videos will be recorded for security in videos lasting 5 minutes.
In Motion Detection mode (Mode Change Switch in M) when you connect the charger to the socket the LED will light blue and red. They will then turn off and The red LED will flash 3 times indicating the beginning of recording. When motion is detected, videos will be recorded for security on videos lasting 5 minutes.
In both modes, when the maximum storage is reached, The uploader will automatically delete the oldest videos. Approximately 8GB is equivalent to 8 hours of recording.
Step 6 - Setting Watermark without Wifi
To modify the watermark on videos connect via USB to a computer and open the Timerest.txt file.
We can adjust the date and time of the watermark. For example, if we want to indicate the date 10/06/2023 and time 12:00, we will modify the first line of text to:
20230610120000
Remember save changes to file.
Step 7 - Wifi Remote Viewing
Step 7.1 - Application Download
Download the LookCam app on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device.
Step 7.2 - Wifi connection
Connect the charger to the socket to turn on Wi-Fi. When Wi-Fi is activated, a blue light will flash. Next, access the mobile's Wi-Fi settings and connect to the wifi network FXXXXXX or WIFI_XXXXXX of the charger. If a notice appears when connecting indicating that this Wi-Fi network does not have internet and showing the option to maintain the connection or disconnect it, we must maintain the connection.
The blue light will stop flashing as long as there is a device connected via Wifi.
Step 7.3 - Viewing and Configuration
The application will recognize the Wi-Fi of the device to which we are connected and we will be able to view the live image.
Pressing in gear icon On the main screen we can modify camera parameters and connect the camera to a Wi-Fi network by clicking on Wi-Fi Setting. The Wi-Fi network must be 2.4GHz type. When the connection is successful the blue led will stop flashing y we view the camera from anywhere in the world with internet.
Step 7.4 - Display Settings
Through the application we can adjust some parameters visualization such as night vision or turning off the detector's LEDs.
Step 7.5 - Share Access
Open the application and click on the icon in the upper right corner +. Next, click on “Add new online Camera”.
From the mobile used to configure the detector Click on the gear icon to display the Camera ID.
IEnter the ID and default password: 123456 or the password we have established.
Step 8 - Reset
If the charger is failing or we want to restore the factory settings, connect to a socket and insert the reset clip until it clicks and hold for at least 3 seconds.
The Reset hole is located behind the cover on the charger without Wifi and on the side in the version with Wifi.
Frequent Problems
1 - Does not turn on
The battery integrated into the charger It only has the function of saving the recording if you disconnect. To use it, it must be connected to a socket. The charger allows you to charge a mobile phone or other device while it is on and recording. The charger provides a 5V and 1A charge compatible with most devices.
If the charger is failing or we want to restore the factory settings, connect to a socket and insert the reset clip until it clicks and hold for at least 3 seconds.
The Reset hole is located behind the cover on the charger without Wifi and on the side in the version with Wifi.
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD up to 32GB.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model name: Full HD Spy Camera Charger Without Wifi/Wifi
Model Number:CE-13/14
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 80 mAh capacity
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .