Instructions Camera Button Remote Control
Camera Button Remote Control
Technical characteristics
- Video recording
- microSD storage
- Integrated Battery
Contents
Camera Button
Remote control
USB Charging and Transfer Cable
4 x Replacement Buttons
USB-microSD adapter
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery Connect the included charging cable to the microUSB port on the product and connect to computer or charger charging time is about 3 hours when connected to a 5 Volt and 1 Amp charger (
Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
To know the status of the charge:
- Remove the microSD
- Turn on the camera by placing the switch in the ON position
- Press the button on the remote control with the padlock open
Una red light will flash while charging and it will be fixed when it is at 100%.
Step 2 - MicroSD
Introduce before ignition MicroSD into the slot until you hear a click. It is advisable to use a card with a minimum speed Class 10 and format the card to FAT 32 format. The maximum size allowed is 128 GB.
Step 3 - Power On/Off
To turn on the camera set the camera switch to the position ON.
Step 4 - Video Recording
After turning on the camera, use the buttons on the remote control to:
- Open Padlock Button: Start recording. The blue LED will flash twice and the camera will vibrate three times.
- Closed Padlock Button: Stop recording. The camera will vibrate three times and the blue LED will flash 3 times.
The camera can be used while charging. To do this, use the same procedure. The camera will indicate the start and end of the recording with 1 vibration for the start of the recording and 3 vibrations for the end of the recording.
The camera save the recording in 5 minute videos For security.
Step 5 - Watermark Adjustment
To modify the watermark on videos connect via USB to a computer and open the time.txt file.
We can adjust the date and time of the watermark. For example, if we want to indicate the date 10/06/2023 and time 12:00, we will modify the first line of text to:
2023-06-10,12:00:00 Y
In addition, we can activate/deactivate the mark of water changing between Y (activated) or N (deactivated).
Remember save changes to file.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery Connect the included charging cable to the microUSB port on the product and connect to computer or charger charging time is about 3 hours when connected to a 5 Volt and 1 Amp charger (Maximum 5V 1.0A, using more amperage will reduce the life of the camera's built-in battery).
To know the status of the charge:
- Remove the microSD
- Turn on the camera by placing the switch in the ON position
- Press the button on the remote control with the padlock open
Una red light will flash while charging and it will be fixed when it is at 100%.
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD up to 128GB and with a minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Camera Button Remote Control
Model Number:CE-22
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 250 mAh capacity
Operating temperature: 0 to 40ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .