Instructions Doll Keychain Recorder
Table of Contents
Doll Keychain Recorder
Technical characteristics
- Audio recording
- 8GB Integrated Storage
- Integrated Battery
Contents
Doll Keychain Recorder
Pendant Keychain
Headphones
USB Charging and Transfer Cable
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery Connect the USB to the 3.5mm jack port hidden on the front under the red scarf. It is recommended the charge in USB port of a computer. He charging time is about 1,5 hours when connected to a charging from a 5 Volt and 1 Amp USB port (Maximum 5V 1A, if more amperage is used, the useful life will be reduced or the battery will stop working).
while charging the red light flashes and the charge is 100% when it stops flashing.
Step 2 - Power On/Off, Recording and Volume
- Nose Button – Press – Play/Pause
- Nose Button – Double Press – Switch to Playback between recording files or other audio files such as songs
- Right Eye Button / Press while Playing – Next Audio
- Left Eye Button / Press while Playing – Previous Audio
- Right Eye Button / Hold While Playing – Advance Audio
- Left Eye Button / Hold While Playing – Rewind Audio
- Left Eye Button / Hold While Pausing - Turn up the volume
- Right Eye Button / Hold While Pausing – Volume Down
Step 3 - Settings
To modify various parameters of the Recorder Doll turn on First of all holding down the nose button and then connect via USB to a computer and open the MRECSET.txt file.
- We can adjust the date and time of the files. For example, if we want to indicate the date 10/06/2023 and time 12:00 we will modify the first line of text to: TIME:12:00 2023/06/10
- The VOR value establishes the sound detection recording. The possible values are from 0 to 7, 0 being the deactivation of recording by sound detection (continuous recording, even if there are no sounds). The Values from 1 to 7 establish the sensitivity, with 1 being the least sensitive and 7 the most sensitive (activation with fewer decibels).
- The BIT value allows adjust recording quality from 1 to 4 for the values 32/64/128/192Kbps respectively.
- The GAIN value defines microphone sensitivity in the range from 1 to 7, with 7 being the most sensitive.
- The PART value corresponds to the minutes in which files will be split of recordings, with a range of 10-240min.
Remember save changes to file.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery Connect the USB to the 3.5mm jack port hidden on the front under the red scarf. It is recommended the charge in USB port of a computer. He charging time is about 1,5 hours when connected to a charging from a 5 Volt and 1 Amp USB port (Maximum 5V 1A, if more amperage is used, the useful life will be reduced or the battery will stop working).
while charging the red light flashes and the charge is 100% when it stops flashing.
2 - Does not store
There may be a problem with the file system or the battery. First check if your computer recognizes USB by turning it on first and then connecting it. Then try formatting it in FAT32 format by previously doing a Backup of the files. If it keeps appearing this problem or others, enter a clip to hold reset button located under the red scarf on the left side of the doll. The lights will change state when it starts and ends factory reset and file erase.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Recorder Keychain Doll
Model Number:ME-07
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 120 mAh capacity
Operating temperature: 0 to 60ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .