Nano V3 Earpiece Instructions
Table of Contents
- 1 Nano V3 Earpiece Instructions
- 1.1 What is a Nano Earpiece?
- 1.2 What is a Vip Pro Pinganillo?
- 1.3 How does the Nano and Vip Pro Pinganillo work?
- 1.4 Is the Pinganillo Nano and Vip Pro Safe?
- 1.5 Technical characteristics
- 1.6 Kit Contents
- 1.7 Instructions
- 1.7.1 Step 0 - Original Product PingaOculto
- 1.7.2 Step 1 - Power On and Mobile/MP3 Connection
- 1.7.3 Step 2 - Earpiece Type
- 1.7.4 Step 3 - Using the Kit with Vip Pro Earpiece
- 1.7.5 Step 4 - Using the Nano Earpiece Kit
- 1.7.6 Step 5 - Multifunction and Volume Buttons
- 1.7.7 Step 6 - Battery, Earpiece and Battery Removal
- 1.8 Frequent Problems
- 1.8.1 1 - Doesn't work
- 1.8.2 2 - I can't hear anything or very low
- 1.8.3 3 - I only hear out of one ear / earpiece
- 1.8.4 4 - I hear audios but no calls
- 1.8.5 5 - The button does not work or does not work as it should
- 1.8.6 6 - The integrated microphone does not work
- 1.8.7 7 - I can't extract the earpiece
- 1.8.8 8 - The Choke Collar has stopped working
- 1.8.9 9 - Low Autonomy
- 1.9 Security and Compliance
What is a Nano Earpiece?
What is a Vip Pro Pinganillo?
How does the Nano and Vip Pro Pinganillo work?
Is the Pinganillo Nano and Vip Pro Safe?
Technical characteristics
- size of only 3mm
- Integrated Battery
- Operation by Electromagnetic Induction
- 3.5mm Headphone Jack Connection
- Autonomy of 4 hours
Kit Contents
1 – Puller Magnet
2 – Nano Earpiece Extractor Bar
3 – Nano earpieces (2 magnetic units)
4 – Nano V3 Inductor Collar
5 – USB charging cable
+ Vip Pro SuperMini/UltraMini earpiece
6 – Vip Pro SuperMini or UltraMini earpiece
7 – 2 Batteries 337/SR416SW
Instructions
Step 0 - Original Product PingaOculto
Check that it is a original product of PingaOculto checking that the brand that appears on the product is the same.
If you have doubts about whether it is original, you can contact us and we will verify it. Contact us through: WhatsApp +34 644 098 320 o Email.
Step 1 - Power On and Mobile/MP3 Connection
Turn on the Nano V3 putting the switch located on the side in the ON position. will light the blue led if the neckloop is charged.
Put the whole Kit on a table or flat surface and connect the mobile through the headphone jack. Remove the cover of your mobile, since it can prevent the correct connection. If your mobile needs an adapter, verify that it works with other headphones to rule out a problem with the same one and check that it is original.
On some iPhone models and a compatibility failure has been detected in the use of the device with non-original adapters when making a phone call. You need to use an original adapter or use another mobile.
Step 2 - Earpiece Type
This model can be purchased only with the Nano Earpiece or also with a Vip Pro type Earpiece. The Nano Penguin offers little volume and can only be used in noise-free environments like exams or libraries. The Spy Earpiece Vip Pro offers more volume and can be used in environments with or without noise.
Select the earpiece model to see the configuration steps
Step 3 - Using the Kit with Vip Pro Earpiece
Step 3.1 - Stack Introduction
Select the earpiece model between the Vip Pro SuperMini (flesh color) or the Vip Pro UltraMini (black color)
Vip Pro UltraMini
Type A
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards. Then screw the cap back on checking let it remain correctly screwed.
The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to prevent downloading. The stack model required for this version is 379-SR521SW.
type B
Unscrew the black cap from the earpiece and insert the stack with the positive pole facing upwards. Then screw the cap back on checking let it remain correctly screwed.
The battery begins to be consumed from the moment it is inserted on the earpiece and should withdraw if not to be used to prevent downloading. The stack model required for this version is 337-SR416SW.
VIP Pro SuperMini
Unscrew the black cover of the spy headset and insert the battery with the positive pole up (where are the letters of the brand and the model of the battery is the positive pole).
Next, screw the cap back on, making sure it is screwed on tightly.
La battery begins to discharge as soon as it is inserted on the spy headset and must be removed if not in use to prevent discharge.
The battery model required for the vip pro spy headset is 337-SR416SW.
Step 3.2 - Cleaning Check Operation
Firstly, clean the ear well with a Q-tip, ear cleaning spray or water and dry well. Next, clean the earphone holes with a fine needle and be very careful to remove the wax that obstructs and can make you not hear anything.
Hold the spy headset close to your ear and check that you hear a sound similar to that of an untuned radio.
This sound indicates that it is turned on and works properly.
If the sound is very loud and can be heard without the earpiece in your ear, unscrew the cap and check that the battery is oriented with the positive pole + facing up and screw the cap back on carefully. If the lid or the battery are not aligned it will make this noise.
If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive + side facing up and screw the cap back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
Step 3.3 - Introduction and Placement of the Kit
Insert the earpiece into the left ear. You can also insert it on the right, but generally we hear better on the left. You can push the earpiece with your finger. It is not recommended to insert it too much, as it is not necessary to hide it.
Place the Kit as it appears in the image remembering that the induction collar should always be on the neck under clothes. Put the earpiece in the ear always with the battery inside.
Play a song on your mobile and while playing turn up the volume to the maximum from your mobile. Check if it is heard on the earpiece.
For more security it is recommended to fix the induction collar with cloth or plastic tape to your skin so that it does not move during use. For repeated use you can even sew it to sweatshirts or jackets. Remember that the Induction Collar is not washable.
⚠ If the song is not heard through the earpiece, but you do hear the sound of the radio without tuning, check that the inductor collar is on the neck and that the mobile is correctly connected and with the volume at maximum. If it doesn't work try another mobile. If you need more help contact us: WhatsApp +34 644 098 320 o Email.
⚠ If you cannot hear the sound similar to an untuned radio, check that the battery is correctly inserted with the positive pole + facing up and screw the cover back on carefully. If you have left the battery inserted for a long time, it will be dead and you will have to use the other battery included in the kit or a new one to get it working again.
You are now done configuring the earpiece VIP Pro. You can follow with instructions in:
Step 4 - Using the Nano Earpiece Kit
Step 4.1 - Kit Parts
Extractor Bar, Extractor Magnet and Earpieces
The penguins (in the image indicated by the number 3) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar (2 in the picture) and the puller magnet (1 in the image).
Step 4.2 - Test Function
Place together the Extractor Magnet and the two earpieces and place them in contact with the inductor collar, which must be rolled as in the picture. The extractor magnet, being also made of a piezoelectric material, reacts to inductive waves in the same way as the earpieces, vibrating and causing the sound, for this reason we will use it together with the earpieces to carry out the test.
Play a song on your mobile/MP3 and while playing turn up the volume to the maximum from your mobile. Bring your ear closer to the extractor magnet and to the earpieces that are in contact with the induction collar and check if it is heard and/or vibrates.
Si vibrate and/or can be heard the kit It's working correctly.
If they do not vibrate or hear anything, repeat the steps with another mobile and verify that the induction collar has a charge, that the cable is coiled as in the image, that you have placed the extractor magnet and the two earpieces attached to the cable and that the volume is maximum while the song is playing. If you need more help contact us: WhatsApp +34 644 098 320 o Email.
Step 4.3 - Introducing Nano Earpiece
Enter first a penguin (only one of the two that appear in the image indicated by a 3) in the left ear (we hear better through the left ear than through the right) through the following procedure:
- Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
- Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, as it will not be inserted correctly).
- keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.
You may need to repeat this step several times
For check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor magnet behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear with Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it it is recommended that you have a ear cleaning to remove wax plugs.
If you can't enter it, contact us to help you: WhatsApp +34 644 098 320 o Email.
Step 4.4 - Kit Placement and Volume Adjustment
When the earpiece has been correctly inserted in the left ear, place the Kit on the body as it appears in the image, remembering that the induction collar should always be on the neck under clothing so that the earpiece receives the sound.
Play the song, recording or phone call by turning the volume up to the maximum on your mobile to check if the volume it provides is enough a penguin (sufficient in most cases) if we have inserted the earpiece correctly, if the volume is maximum, the collar has enough charge and is located on the neck).
If you hear very low, Also insert the other earpiece into your right ear or try turning up the volume on the Nano V3 Neckloop (different volume than mobile).
For increase the volume of the neckloop (different volume than mobile) hold down the + button of the Nano V3 while the earpiece is on the left ear and the neckloop on the neck. When you hear a whistle means that the volume is at maximum* on the necklace.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear it is because we have not inserted the earpiece correctly, the volume is not the maximum in the mobile, the induction collar does not have enough charge or it is not on the neck).
*
The volume to the maximum in the inducer collar drastically reduces the autonomy. You must adjust the volume to the maximum on the mobile and to the minimum audible (usually 50-70%) on the neckloop (you can decrease the volume by holding down the volume – button and increase it by holding down the + button).
Step 5 - Multifunction and Volume Buttons
You can use this device by phone call or with recordings. Bill integrated microphone is located on the top of the Nano V3.
El button A performs the following functions:
- 1 Click: Answer/Hang up call or Pause/Play recordings.
- 2 Clicks: Next Recording/Song.
The volume buttons of the Nano V3 have the functions:
- Hold + Button : Increase the volume of the Nano V3.
- Hold Button – : Decrease the volume of the Nano V3.
Recommended search the app store from our mobile one compatible application with these functions to use the kit to play songs or recordings. For iPhone it is recommended: https://apps.apple.com/es/app/grabadora-de-voz/id685310398
This device has two volumes, the one for your mobile and the one for the Nano V3 To increase autonomy it is recommended DO NOT max out the volume on the Nano V3. The optimal volume is 50-70% in the Nano V3 inductor collar and 100% in the mobile.
Step 6 - Battery, Earpiece and Battery Removal
La Nano V3 device autonomy is approximately 3-4 hours.
To charge it, connect el USB to a computer or charger up to 5V and 1A. The estimated time of charge is 1-1,5 hours. The device is fully charged when the red light disappears while its charging. The Nano V3 must be turned off while charging.
The battery should be charged/discharged at least once every 1 months to increase battery life.
Earpiece Removal
Step 6.1 - Removing the Nano Earpiece
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the first image.
Another VERY effective extraction method es hold with one finger the puller magnet inside the ear and shake your head while keeping it rotated as in the second image. It can be hard to remove the first few times, but after several attempts it will succeed.
As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a recording at maximum volume.
If you cannot extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.
It is recommended to clean the earpiece with water or alcohol, the extractor magnet and the extractor bar before and after each use.
Lastly, remember to turn off the collar inductor to prevent it from discharging.
Step 6.2 - Removing the Vip Pro Earpiece
Select the earpiece model between the Vip Pro SuperMini (flesh color) or the Vip Pro UltraMini (black color)
Vip Pro UltraMini
Remove the earpiece by pulling the transparent thread with your fingers. If you don't make it, you can try pulling of the transparent thread with a tweezer.
Lastly, remember to disconnect the battery when you finish using the device to prevent it from downloading.
⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.
Type A
Remove the earpiece by inserting the removal bar into your ear. Remember that this is magnetized to the battery, so You should never insert the earpiece into your ear without first inserting the battery.
Lastly, remember to disconnect the battery when you finish using the earpiece so it doesn't download.
⚠ If you can't extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.
type B
Remove the earphone by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, remember to disconnect the battery when you finish using the spy headset to prevent further consumption.
VIP Pro SuperMini
Remove the earphone by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, remember to disconnect the battery when you finish using the spy headset to prevent further consumption.
Frequent Problems
the penguins can be complex products when putting them into operation. Check below the frequent problems penguin nano v3 and its solution.
1 - Doesn't work
Nano earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. For this reason it is impossible for nano earpieces not to work and The problem will be the inductor collar or the mobile. Follow the steps and tests indicated in the next section.
Si the vip pro earpiece does not work follow the checks below:
Clean the earphone holes with a fine needle and be very careful to remove earwax that obstructs the earpiece and can make you not hear anything.
Check that the battery is charged. If it has been left on the spy headset for a long time, it will download and you must use a new battery. The battery discharges even when not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where the letters of the brand and the battery model are the positive pole).
Screw the cap back on, making sure it is screwed tightly.
If you hear the sound similar to an untuned radio by putting the earpiece in your ear with the battery inserted, the earpiece is working and the problem will be another. Follow the steps indicated in the next section (2 – I can't hear anything or very low).
The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge.
2 - I can't hear anything or very low
With which of the two earpieces are you experiencing the problem?
Spy Earpiece Nano
Extractor Bar, Extractor Magnet and Earpieces
The penguins (in the image indicated by the number 3) are the two smallest pieces and should part with the nail. You can find them in the Kit in a bag. Also included are extractor bar (2 in the picture) and the puller magnet (1 in the image).
Turn on the Nano V3 putting the switch located on the side in the ON position. will light the blue led if the neckloop is charged.
Put the whole Kit on a table or flat surface and connect the mobile through the headphone jack. Remove the cover of your mobile, since it can prevent the correct connection. If your mobile needs an adapter, verify that it works with other headphones to rule out a problem with the same one and check that it is original.
On some iPhone models and a compatibility failure has been detected in the use of the device with non-original adapters when making a phone call. You need to use an original adapter or use another mobile.
Place together the Extractor Magnet and the two earpieces and place them in contact with the inductor collar, which must be rolled as in the picture. The extractor magnet, being also made of a piezoelectric material, reacts to inductive waves in the same way as the earpieces, vibrating and causing the sound, for this reason we will use it together with the earpieces to carry out the test.
Play a song on your mobile/MP3 and while playing turn up the volume to the maximum from your mobile. Bring your ear closer to the extractor magnet and to the earpieces that are in contact with the induction collar and check if it is heard and/or vibrates.
Si vibrate and/or can be heard the kit It's working correctly.
If they do not vibrate or hear anything, repeat the steps with another mobile and verify that the induction collar has a charge, that the cable is coiled as in the image, that you have placed the extractor magnet and the two earpieces attached to the cable and that the volume is maximum while the song is playing. If you need more help contact us: WhatsApp +34 644 098 320 o Email.
If in the previous step when carrying out the test you have noticed how the extractor magnet together with the earpieces vibrate or sound, the kit is working correctly and the problem is:
- El inductor collar has no charge or has low charge.
- El induction collar was not on the neck while being tested with the earpiece in the ear.
- El inducer collar volume is low (volume different from mobile).
- El volume on his mobile was not maximum.
- The earpiece has not been correctly inserted. (The MOST likely option). Follow the earpiece input steps again:
Enter first a penguin (only one of the two that appear in the image indicated by a 3) in the left ear (we hear better through the left ear than through the right) through the following procedure:
- Turn your head 90º so that the left ear where we are going to insert the earpiece is facing upwards.
- Then drop the earpiece into your ear (You should never try to insert the earpiece with a cotton swab or similar, as it will not be inserted correctly).
- keeping the same position with your head turned, shake your head and make circular movements until you notice the sensation of a drop of water falling into the ear and/or the clogged ear.
You may need to repeat this step several times
For check that the earpiece has been correctly inserted, put your hand to your ear (so that the earpiece does not fall to the ground) and turn your head to the opposite side. If the earpiece comes out of your ear easily when turning the head is that it has NOT been entered correctly. You must repeat the introduction steps.
also can check if it is correctly inserted by verifying that another person does not see the earpiece in the ear. If you can see it, DO NOT it is well introduced.
Tip: There are times when The earpiece just needs a little push to be correctly entered. If so, place the extractor magnet behind your ear, close to the neck. You will notice how the earpiece moves and you can finish placing it.
Tip 2: There are certain people who accumulate more amount of earwax, especially in the inner part of the ear, causing more difficult to introduce the earpiece. Remember clean the ear with Cleaning Sprays and sticks for the ears. Usually you will only need practice more to enter it correctly. If you can't enter it it is recommended that you have a ear cleaning to remove wax plugs.
If you can't enter it, contact us to help you: WhatsApp +34 644 098 320 o Email.
When the earpiece has been correctly inserted in the left ear, place the Kit on the body as it appears in the image, remembering that the induction collar should always be on the neck under clothing so that the earpiece receives the sound.
Play the song, recording or phone call by turning the volume up to the maximum on your mobile to check if the volume it provides is enough a penguin (sufficient in most cases) if we have inserted the earpiece correctly, if the volume is maximum, the collar has enough charge and is located on the neck).
If you hear very low, Also insert the other earpiece into your right ear or try turning up the volume on the Nano V3 Neckloop (different volume than mobile).
For increase the volume of the neckloop (different volume than mobile) hold down the + button of the Nano V3 while the earpiece is on the left ear and the neckloop on the neck. When you hear a whistle means that the volume is at maximum* on the necklace.
(A single earpiece in the left ear is recommended, since when trying to insert one in each ear, the first one will be misplaced when introducing the second one). (It is VERY likely that if we do not hear well with an earpiece in the left ear it is because we have not inserted the earpiece correctly, the volume is not the maximum in the mobile, the induction collar does not have enough charge or it is not on the neck).
*The volume to the maximum in the inducer collar drastically reduces the autonomy. You must adjust the volume to the maximum on the mobile and to the minimum audible (usually 50-70%) on the neckloop (you can decrease the volume by holding down the volume – button and increase it by holding down the + button).
Spy Earpiece Vip Pro
Clean the earphone holes with a fine needle and be very careful to remove earwax that obstructs the earpiece and can make you not hear anything.
Check that the battery is charged. If it has been left on the spy headset for a long time, it will download and you must use a new battery. The battery discharges even when not in use.
Unscrew the black cap of the spy headset and insert the battery with the positive pole facing up (where the letters of the brand and the battery model are the positive pole).
Screw the cap back on, making sure it is screwed tightly.
If you hear a sound similar to that of an untuned radio When you put the spy earpiece in your ear with the battery inserted, the spy headset is working and the problem is another.
Place the induction collar on the neck and the earpiece in the ear and checking that it is connected to the mobile, play a song at maximum volume on your mobile. As well turn up the volume all the way on the neckloop holding down the + button of the necklace.
The battery begins to be consumed from the moment it is inserted in the earpiece and must be removed if it is not going to be used to avoid its discharge. The model of the stack is 337-SR416SW.
The volume to the maximum in the inducer collar drastically reduces the autonomy. You should set the volume to the minimum audible (typically 50-70%) on the collar (you can decrease the volume by pressing the volume – button and increase it by pressing the + button).
3 - I only hear out of one ear / earpiece
In nano earpieces this failure is impossible. If one device works, the other works too. This is because the earpieces work because of the material they are made of, a piezoelectric material, and not due to any internal electronics in the earpieces. The material reacts to the inductive waves of the induction collar by vibrating and making sound.
Most likely, the earpiece has not been correctly inserted into the ear, we are confusing the extractor magnet with the earpieces or two earpieces together or that let's hear more through one ear (We normally hear more through the left ear).
If the volume obtained by the earpiece in one ear is sufficient, it is recommended to use it with a single earpiece and save the other.
4 - I hear audios but no calls
Si The kit works with songs, recordings or audios in general from our phone, but not with phone calls, is due to a problem in using a non-original adapter. This occurs especially in iPhone when using a non-original Apple adapter to get the 3.5mm headphone jack port.
Es very important to use an original adapter from the manufacturer to make it compatible with phone calls. Otherwise, it will only work with audios such as songs, recordings or videos.
It is also important Check your mobile settings so that the audio output is correctly configured.
If the problem persists, it is recommended try with another mobile.
5 - The button does not work or does not work as it should
El button A is not necessary if the functions are performed directly from the mobile and It may not be compatible with some mobile phones, especially if adapters are used. As well depends on the application used to play songs or recordings.
El button A performs the following functions:
- 1 Click: Answer/Hang up call or Pause/Play recordings.
- 2 Clicks: Next Recording/Song.
The volume buttons of the Nano V3 have the functions:
- Hold + Button : Increase the volume of the Nano V3.
- Hold Button – : Decrease the volume of the Nano V3.
Recommended search the app store from our mobile one compatible application with these functions to use the kit to play songs or recordings. For iPhone it is recommended: https://apps.apple.com/es/app/grabadora-de-voz/id685310398
This device has two volumes, the one for your mobile and the one for the Nano V3 To increase autonomy it is recommended DO NOT max out the volume on the Nano V3. The optimal volume is 50-70% in the Nano V3 inductor collar and 100% in the mobile.
6 - The integrated microphone does not work
The built-in microphone can not work on mobiles with a non-original adapter, as for example usually happens on iPhone. It is recommended to purchase a original adapter or use another mobile. If it still does not work, it is recommended try with another mobile.
7 - I can't extract the earpiece
With which of the two earpieces are you experiencing the problem?
Spy Earpiece Nano
You may have to try several times until it is successfully removed.
remove the earpiece approaching the extractor bar (indicated in the image with a 2) with puller magnet (indicated with a 1) at its base to the ear as you can see in the first image.
Another VERY effective extraction method es hold with one finger the puller magnet inside the ear and shake your head while keeping it rotated as in the second image. It can be hard to remove the first few times, but after several attempts it will succeed.
As well the earpiece may have already been removed and fallen to the ground, check if it is still in your ear by connecting the Kit and checking if you hear when playing a recording at maximum volume.
If you cannot extract it, contact us to help you: WhatsApp +34 644 098 320 o Email.
It is recommended to clean the earpiece with water or alcohol, the extractor magnet and the extractor bar before and after each use.
Lastly, remember to turn off the collar inductor to prevent it from discharging.
Spy Earpiece Vip Pro
Remove the earphone by pulling the transparent thread with your fingers. If you don't get it, you can try to pull the transparent thread with tweezers.
Lastly, remember to disconnect the battery when you finish using the spy headset to prevent further consumption.
8 - The Choke Collar has stopped working
Most likely, has stayed on and the battery has been depleted. Perform a full charge. It is also possible that the volume has gone down, you must upload it by holding the + button of the Nano V3 while it is turned on and connected to your mobile.
If you have already verified that you have a charge and that the volume of your mobile and the Nano V3 is maximum follow the steps indicated in section 2 -I can't hear anything or very low of frequent problems.
If the Kit does not work, contact us to help you: WhatsApp +34 644 098 320 o Email.
9 - Low Autonomy
🔋❗ The volume to the maximum in the induction collar drastically reduces autonomy. You must adjust the maximum volume on mobile and audible minimum (typically 50-70%) at neckloop (you can decrease the volume holding down the button – volume and increase it by holding down the + button).
Security and Compliance
Below is the important product information in relation to the security and compliance that guarantee proper and safe use of the product:
⚠ WARNING: Do not use or store the product near other electronic equipment because the magnetic field of adjacent electrical equipment will seriously damage or interfere with the product. Also do not use this product if you have impaired hearing which may be affected, if you use hearing aids, or if you are using a pacemaker or any electronic medical device.
® PingaOculto. All rights reserved.
Product specifications:
Model Name: Nano V3 / Nano V3 + Vip Pro SuperMini / Nano V3 + Vip Pro UltraMini
Model number: N-06/N-07/N-08
Product identifier: B09VZP4NG7 / B09Y3N4L9J / B09VZQS13K
Product battery: Integrated Lithium-Ion type with 500 mAh capacity
Electrical Rating: Power: 100-240V 50/60Hz 0.15A
Batteries Included: 2 x Silver Oxide Batteries type 337-SR416SW
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .