Instructions for Outdoor 4G Solar Surveillance Camera IP66 HD
Table of Contents
- 1 Instructions for Outdoor 4G Solar Surveillance Camera IP66 HD
- 1.1 Outdoor 4G Solar Surveillance Camera IP66 HD
- 1.2 Technical characteristics
- 1.3 Contents
- 1.4 Instructions
- 1.5 Frequent Problems
- 1.6 Security and Compliance
Outdoor 4G Solar Surveillance Camera IP66 HD
Technical characteristics
- Full HD recording
- Solar Charging and IP66 Protection
- Remote Transmission via 4G
- Lens with Rotation and Night Vision
- Two-way communication
Contents
Solar Surveillance Camera
Solar panel
Solar Panel Extension Cable 5 Meters
Solar Panel Support
Wall Support
USB Charging Cable
Fixing Screws
Manual
Instructions
Step 1 - Diagram
The solar chamber integrates various sensors and accessories. In this diagram you can see what each element is.
El LED indicator located in the lower left corner of the camera indicates the status of the device:
- Pink Light Blinking – Camera On
- Red Light Blinking – Searching for 4G Network
- Blinking Blue Light – SIM card inserted detected OR indication that the camera is ready for configuration
- Fixed Blue Light – Connected to 4G Network
Step 2 - Introduction SIM card and microSD
Introduce before ignition the SIM card according to the orientation of the image into the slot until you hear a click. Remember first delete the SIM Card PIN on your mobile and verify that the 4G network is enabled on the SIM card to be inserted.
It is also possible to insert a microSD card up to 128GB to store the recordings. Remember format it first in FAT32 format and use a microSD with a transfer speed of at least Class 10 to ensure optimal operation.
Step 3 - Wall Fixing
The solar chamber can be fixed on the wall integrated with the solar panel or with the solar panel extended with the included 5 meter cable according to the diagram.
Remember to locate the solar panel in the area with the maximum possible number of solar hours.
When installing the wall mount to camera is VERY important to use short screws so as not to puncture the battery. Besides, remember to test its operation before installation.
Step 4 - Charging and Power Connection
It is possible to charge the solar camera directly with the included USB cable. Total charging time is approximately 6 hours. It is recommended to do the initial loading in this way. While charging, keep the switch OFF.
For Turn on the camera, place the switch in the ON position.
If the solar energy provided is not enough or the use is very high, you can connect the charging cable, always verifying that waterproof elements are used if used outdoors.
Step 5 - Wifi Remote Viewing
Step 5.1 - Application Download
Download the Tuya Smart or EDUP app on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device.
Step 5.2 - Registration and Permissions
When starting the Tuya Smart or EDUP application it will be necessary grant all necessary permissions y create an account or access a user account already created. Remember activate the acceptance box of terms and conditions and privacy policy to create the user account or access.
Step 5.3 - Add Device
Turn on the camera and wait at least 10 seconds for the camera to start. Activate Bluetooth and Wifi on your mobile.
Es VERY important to grant all permissions in the app for optimal product configuration and operation.
In the Tuya Smart application click on «add device» and then in the top corner in square icon.
Then scan the QR code located on the device. When the LED indicator changes from red to blue, the configuration will begin. may take up to 1 minute.
Step 5.4 - Viewing and Settings
When the camera has been successfully connected and linked to the Tuya Smart account we can see it from anywhere in the world with internet. From the application it is possible to rotate the camera, talk to the camera, full screen and other functions.
For activate motion detection, click on the icon with a siren. If need share camera access You must click on the pencil in the upper right corner while we are viewing it and then on «Share Team«.
Step 6 - Reset
If the camera has been incorrectly configured, it needs to be reconfigured or is there a problem In its normal operation it is recommended reset the camera by holding down for 5 seconds the reset button.
Frequent Problems
1 - Does not turn on
It is possible to charge the solar camera directly with the included USB cable. Total charging time is approximately 6 hours. It is recommended to do the initial loading in this way. While charging, keep the switch OFF.
For Turn on the camera, place the switch in the ON position.
If the solar energy provided is not enough or the use is very high, you can connect the charging cable, always verifying that waterproof elements are used if used outdoors.
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 2 and 128 GB and that the transfer speed is minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model Name: 4G Outdoor IP66 HD Solar Surveillance Camera
Model Number:CE-04
Product identifier: 706212918430
Operating temperature: 0 to 50ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .