2MP Wifi Smoke Detector Spy Camera Instructions
Table of Contents
- 1 2MP Wifi Smoke Detector Spy Camera Instructions
Smoke Detector Spy Camera 2MP Wifi
Technical characteristics
- Full HD recording
- 1/4” CMOS image sensor
- microSD storage
- Remote Transmission via WiFi
- Integrated Battery
Contents
Smoke Detector Spy Camera 2MP Wifi
USB Charging and Transfer Cable
2 x Plugs and Screws for Fixing
Manual
Instructions
Step 1 - Opening
Smoke detector hides a compartment for the MicroSD slot.
For open the rear compartment it is due to unscrew the two screws on the back cover with a star screwdriver.
Step 2 - Load
The battery is shipped with a low charge. It must of charge with a USB charger.
The smoke detector emits a Red light while charging that turns off when charging is 100%:
El charging time is about 2-3 hours when connected to a 1 amp charger at 5 Volts (
Maximum 5V 1.0A, using more amperage will reduce battery life).
Step 3 - MicroSD
When inserting the microSD into the slot we must push the microSD until you hear a click, and push again to extract it. It is recommended to format the card to FAT 32 format and use a card with a Class 10 transfer speed. The minimum size allowed is 32 GB and the maximum 128 GB.
Step 4 - Power On/Off
Turn on the smoke detector by moving the switch to "WE". After a few seconds will light up blue and red led.
For delete, move the switch to the OFF position.
Step 5 - Wifi Remote Viewing
Step 5.1 - Application Download
Download the HDsmartIPC app on your mobile by pressing the Android or App Store (iPhone) icon depending on the model of your device.
Step 5.2 - Wifi connection
On ignition wait at least 1 minute for wifi to be activated. When Wi-Fi is activated, a blue and red light will flash. Next, access the mobile's Wi-Fi settings and connect to the LM wifi network… If a notice appears when connecting indicating that this Wi-Fi network does not have internet and showing the option to maintain the connection or disconnect it, we must maintain the connection.
The blue light will stop flashing as long as there is a device connected via Wifi.
Step 5.3 - Viewing and Configuration
The application will recognize the wifi of the smoke detector to which we are connected and we will be able to view the live image.
Pressing in gear icon On the main screen we can modify camera parameters and connect the camera to a Wi-Fi network by clicking on Wi-Fi config. The Wi-Fi network must be 2.4GHz type. When the connection is successful we view the camera from anywhere in the world with internet.
Step 5.4 - Display Settings
Through the application we can adjust some parameters visualization such as night vision or turning off the detector's LEDs.
Step 5.5 - Share Access
Click on the gear icon and then in «Camera info» to query the UID.
From another mobile click on the + icon in the upper right corner of the main screen and indicate the UID and default password: 8888.
Step 6 - Reset
If the product is failing or we want to restore factory settings, while it is on, press the reset button until it clicks and hold for at least 3 seconds. Then wait 1 minute for the reset to complete.
Frequent Problems
1 - Does not turn on
The battery is shipped with a low charge. It must of charge with a USB charger.
The smoke detector emits a Red light while charging that turns off when charging is 100%:
El charging time is about 2-3 hours when connected to a 1 amp charger at 5 Volts (Maximum 5V 1.0A, using more amperage will reduce battery life).
2 - Does not store
Enter the microSD into a computer and check that you can read it.
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 32 and 128GB and that the transfer speed is minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model name: Smoke Detector Spy Camera 2MP Wifi
Model Number:CE-26
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 900 mAh capacity
Operating temperature: 0 to 35ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .