Instructions Watch Spy Camera 32GB
Clock Spy Camera 32GB
Technical characteristics
- Full HD recording
- High Quality Images
- Audio recording
- Storage in microSD 32GB
- Integrated Battery
Contents
Clock Spy Camera 32GB
USB Charging and Transfer Cable
EU charger 5V/1A
Manual
Instructions
Step 1 - Load
It is necessary to charge the product before its first use. To charge the battery unscrew the protective cap of the USB port and Connect the included USB charging cable. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (
Maximum 5V 1.0A, using more amperage will reduce the life of the battery built into the watch).
The device will start charging when a power is turned on. blue and red led and it will be fully charged when the red LED turns off.
Step 2 - Change microSD
The Spy Camera Clock includes a built-in microSD of up to 32GB which is sufficient for the vast majority of cases. The microSD can be changed for another one of up to 256GB formatted in FAT32. To change the integrated microSD turn the bottom cover counterclockwise. After installing the microSD hold down the format button and connect via USB to the computer. The blue LED will start flashing. When the microSD is formatted the blue LED will stop flashing.
If the blue LED flashes when turned on, the microSD is not inserted or is full.
Step 3 - Power On/Off and Time Setting
turn on the clock holding down the ON/OFF button 3 seconds until the blue and green led and the blue led stay on. For set the time Remove the protective plastic, set the time clockwise and push the clock to start working. He watch uses a battery independent of the battery for the clock mechanism.
For turn off the clock, repeat the procedure until all the LEDs turn off.
Step 4 - Mode Change
When the clock is on the mode selector button allows you to switch between:
- Blue LED – Recording of video and audio
- Green LED – Audio recording
- Blue and Green Led – Photography
To switch between modes press the button once mode selector. To activate the 60 seconds per video and audio recording mode motion detection long press mode selector button until the blue and green leds flash 3 times.
Step 5 - Video, Photography and Audio Recording
After selecting the mode, press the ON/OFF button once to start recording. Depending on the mode, the LEDs will indicate:
- Video: Blue LED – Press ON/OFF Button – 3 Flashes Blue LED (Recording Starts) – Press ON/OFF Button (Stop Recording)
- Audio: Green LED – Press ON/OFF Button – 3 Flashes Green LED (Recording Starts) – Press ON/OFF Button (Stop Recording)
- Photography: Green and Blue Led – Press ON/OFF Button – 1 Blue and Green Led Flash (Photography)
In motion detection mode the LEDs will indicate:
- Press and hold Mode Selector Button – 3 Green and Blue LED Flashes (Home Motion Detection) – Press ON/OFF Button (End Motion Detection) – Blue LED
La night vision activates automatically in video recording when IR sensors detect low light
Step 6 - Adjust Watermark and Video Resolution
To modify the watermark on videos and resolution connect via USB to a computer and open the Time.txt file.
We can adjust the date and time of the watermark. For example, if we want to indicate the date 10/06/2023 and time 12:00, we will modify the first line of text to:
2023-06-10 12:00:00-Y-1—–Modified for current time
In addition, we can activate/deactivate the mark of water changing between Y (activated) or N (deactivated). We can also change video resolution changing the number to 1 (1920 x 1080), 2 (128 x 780), or 3 (640 x 480).
Remember save changes to file.
Step 7 - Reset
If the watch freezes and does not react we can force restart holding down the ON/OFF and mode selector buttons at the same time.
Frequent Problems
1 - Does not turn on
It is necessary to charge the product before its first use. To charge the battery unscrew the protective cap of the USB port and Connect the included USB charging cable. He charging time is about 1 hour when connected to a 5 Volt and 1 Amp charger (Maximum 5V 1.0A, using more amperage will reduce the life of the battery built into the watch).
The device will start charging when a power is turned on. blue and red led and it will be fully charged when the led
2 - Does not store
Enter the microSD into a computer and check that you can read it
La microSD it is recommended that you have FAT32 format.
Remember to use a microSD between 32 and 256GB and that the transfer speed is minimum Class 10.
Security and Compliance
Below is indicated important product information in relation to the security and compliance that guarantee proper and safe use of the product:
® PingaOculto. All rights reserved.
Product specifications:
Model name: Spy Camera Watch 32GB Night Vision
Model Number:CE-17
Product identifier: 706212918430
Product battery: Integrated Lithium-Ion type with 500 mAh capacity
Operating temperature: 0 to 40ºC
Product Use: Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet, and wait for the device and adapter to dry completely before plugging them back in. Do not try to dry your device or adapter with an external heat source, such as a microwave oven or blow dryer. If the device or adapter is damaged, stop using it immediately. Use only the supplied accessories to power your device. To avoid the risk of electric shock, do not touch the device or the cables connected to it during a thunderstorm. The cables and/or adapters are only designed for indoor use.
Terms of use: PingOc Now SL is not responsible for the fraudulent or erroneous use of the product due to the lack of understanding or reading of the information in the instructions and precautions. This product is not a toy and must not be used contrary to current applicable laws. If you have any questions you can contact us before using the product.
For EU customers: Hereby, PingaOculto, declares that the type of radio equipment is in accordance with Directive 2014/53/EU.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Compliance: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restrictions.
Radio Frequency Exposure Compliance: As a health protection measure, this device complies with the limits for exposure of the general public to electromagnetic fields in accordance with council recommendation 1999/519/EC. This device can be placed on the body avoiding prolonged use of it for more than 5 hours.
How to recycle your device properly: Disposal of certain electronic devices is regulated in some areas. Make sure you comply with local regulations and laws.
Additional Safety and Compliance Information: For additional information on safety, recycling and compliance or other important issues related to your device, do not hesitate to contact us through any of the available means of contact. Means of contact with: Email contact@pingaoculto.com, Call/WhatsApp +34 (644)098 320 .
Limited Warranty: All official brand items PingaOculto have 2 year minimum warranty. This guarantee may be extended or reduced depending on the country where the sale takes place, as is the case by law in Spain where it is extended to 3 years as established by Decree-Law 7/2021 with respect to the Guarantee on the Sale of Goods. of consumption. We reserve the right to deny the guarantee of a product if improper or negligent use by the client is verified, similar to those reflected in: https://www.pingaoculto.es/garantias-y-devoluciones/ If you need to contact us due to a failure, you can do so by email: contact@pingaoculto.com or by Call/WhatsApp: +34 (644)098 320 .